im going to work on it a little bit tonight ill see if i cant move it forward
On3 ff turbo build
- Thread starter csb96cobra
- Start date
im going to work on it a little bit tonight ill see if i cant move it forward
I know it's dirty but moved the fuse box inside the fender well
Also cleaned up the passenger side as well
Intercooler mounted and most of the cold side ran need to take the intake pipe to get the maf housing welded in
Mocked up the passenger side just to get an idea of how it will look
Also cleaned up the passenger side as well
Intercooler mounted and most of the cold side ran need to take the intake pipe to get the maf housing welded in
Mocked up the passenger side just to get an idea of how it will look
Not much progress this weekend but got some fuel lines ran and fuel pressure regulator mounted
Keep up the progress man and keep posting so we can all see how this turns out!
When ever I'm back in town sometime I would love to be able to check this beast out sometime when it's done haha
When ever I'm back in town sometime I would love to be able to check this beast out sometime when it's done haha
Made a bit more progress tonight extended some wires got the fuse box hidden sub frame connectors welded fuel lines ran and some vacuum lines taken out and the battery box mounted in the trunk
Cut the crash bar to allow the intercooler to get more air
Power line ran for the battery
Waste gates in need to finish the vacuum lines
Power steering reservoir relocated inside the fender well worked out pretty good
Pretty much finished with the wire tuck on the driver side may need cleaned up a bit still
02 sensor extensions in and sensors in the headers
Coolant crossover finished and wire extended for coolant temp sensor
Started wiring up the boost controller/wideband still lots left to do but I'm seeing the light at the end of the tunnel
Power line ran for the battery
Waste gates in need to finish the vacuum lines
Power steering reservoir relocated inside the fender well worked out pretty good
Pretty much finished with the wire tuck on the driver side may need cleaned up a bit still
02 sensor extensions in and sensors in the headers
Coolant crossover finished and wire extended for coolant temp sensor
Started wiring up the boost controller/wideband still lots left to do but I'm seeing the light at the end of the tunnel
How much of a hassle was the fuse box relocation. Im in the process of finishing the pass. side and moving to the drivers side here shortly.
It's time consuming not to difficult tho I recommend putting it as far in the fender as possible so the plastic wheel well can go back in
Been a long while since an update been very busy with work so here are a few newer pics
New exhaust ring
Return fuel line
Fuel pump mounted up with fuel filters
Fuel line ran from the sump
And a shot from the back just cus
Sent from my SAMSUNG-SM-G890A using Tapatalk
New exhaust ring
Return fuel line
Fuel pump mounted up with fuel filters
Fuel line ran from the sump
And a shot from the back just cus
Sent from my SAMSUNG-SM-G890A using Tapatalk
Got the exhaust finished today
Bumper exit
Sent from my SAMSUNG-SM-G890A using Tapatalk
Bumper exit
Sent from my SAMSUNG-SM-G890A using Tapatalk
finally got to start the cobra up last night
https://www.youtube.com/watch?v=FQGIyojlx9M
https://www.youtube.com/watch?v=FQGIyojlx9M
Sounds good!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
nice!
Users who are viewing this thread
