Old town Parts list
- Thread starter adeem
- Start date
Rough Country steering stabilizer (new, never used)
$ Parts For Sale $
Still have to get photo of the amp on the site.
Also have a stock:
TQ converter
Fuel Pump
Still have to get photo of the amp on the site.
Also have a stock:
TQ converter
Fuel Pump
My old tail lights and whatever else is sitting around the garage.
- Western Chassis 2"/3" Drop Hangers
- Western Chassis C-Notch
- Rear Button Bump Stops (New)
- 6 Degree Shim Kit
- 2" Drop Shackles
- Doetsch Tech Nitro Rear Drop Shocks
- SoCal Adjustable End-Links
- Truk Track Slapper Bars
- Custom E-brake bracket
- OEM Lightning Swaybar with Mounting Hardware
- OEM 99 Lightning SVT Leaf Springs with Mounting Hardware
- 1997 Fuel Rails with Accufab Boost Sensitive Regulator
- ICEY I/C Polished Tank (show polished and modified)
- Reichard Racing Blower Spacer
- Metco 90mm Idlers with new NTN bearings
- PLX OLED 60mm OBDII Gauge with Custom Pod
- AutoMeter Custom Steering Column Pod (Sanded smooth and painted Gloss Black)
- Alpine Type R 5x7 Speakers (2 sets,4 Speakers)
- OEM CD Changer and two 6 disc cartridges
- Echo-2 2-way Pager
- G-Tech Pro Performance Meter
- 01-04 Tailight Project (not completed)
- Custom Modified OEM Hood
- Complete Bassani SS Exhaust
- Western Chassis C-Notch
- Rear Button Bump Stops (New)
- 6 Degree Shim Kit
- 2" Drop Shackles
- Doetsch Tech Nitro Rear Drop Shocks
- SoCal Adjustable End-Links
- Truk Track Slapper Bars
- Custom E-brake bracket
- OEM Lightning Swaybar with Mounting Hardware
- OEM 99 Lightning SVT Leaf Springs with Mounting Hardware
- 1997 Fuel Rails with Accufab Boost Sensitive Regulator
- ICEY I/C Polished Tank (show polished and modified)
- Reichard Racing Blower Spacer
- Metco 90mm Idlers with new NTN bearings
- PLX OLED 60mm OBDII Gauge with Custom Pod
- AutoMeter Custom Steering Column Pod (Sanded smooth and painted Gloss Black)
- Alpine Type R 5x7 Speakers (2 sets,4 Speakers)
- OEM CD Changer and two 6 disc cartridges
- Echo-2 2-way Pager
- G-Tech Pro Performance Meter
- 01-04 Tailight Project (not completed)
- Custom Modified OEM Hood
- Complete Bassani SS Exhaust
Last edited:
No advertising, buying/selling is allowed within general forums per site rules. If you want to make a list of what you're bringing fine, no prices!
Last edited:
Anybody wanna take all my stuff and sell it
MMCustomworks Surfboard pod (preped)
ImageShack - Image Hosting :: img00058yl6.jpg
JLP Intake box, black lid and filter
*^-- does not include forced induction kit*
Average condition, some cleaning needed.
ImageShack - Image Hosting :: img00062sw4.jpg
Metal Cowl hood (not a fibergalss hood)
Need to verify manufacturer.
Hood modified for scoops and cowl to function... I did see a drop in IAT2's with this hood on.
Only flaw to hood...
One scoop is cracked. Was going to replace and repair the previously installed rivets at the same time and then repaint, but I went a new direction.
ImageShack - Image Hosting :: img00045fn1.jpg
ImageShack - Image Hosting :: img00046le0.jpg
ImageShack - Image Hosting :: img00058yl6.jpg
JLP Intake box, black lid and filter
*^-- does not include forced induction kit*
Average condition, some cleaning needed.
ImageShack - Image Hosting :: img00062sw4.jpg
Metal Cowl hood (not a fibergalss hood)
Need to verify manufacturer.
Hood modified for scoops and cowl to function... I did see a drop in IAT2's with this hood on.
Only flaw to hood...
One scoop is cracked. Was going to replace and repair the previously installed rivets at the same time and then repaint, but I went a new direction.
ImageShack - Image Hosting :: img00045fn1.jpg
ImageShack - Image Hosting :: img00046le0.jpg
Last edited:
does anyone have a 3 gauge drivers side piller?
Users who are viewing this thread
