Well, after pulling Scott's (aka Sambandit) blower last time and seeing all the oil in the innercooler. We decided to install an oil separator. So, this is what Scott and I came up with. We wanted to hide most of the 3/8" fuel line and we wanted to separator to blend into the engine bay. The separator is ugly!! So, here is the finished product. I think it turned out quite well. You can remove the resevoir to empty the oil quite easy.
This is how we angled the fuel line out of the valve cover and to run down aginst the firewall and under the brake booster.
We moved the elbow to bend the opposite way to get the new fuel line aginst the fire wall and run down under the Booster.
Finished product.
This is how we angled the fuel line out of the valve cover and to run down aginst the firewall and under the brake booster.
We moved the elbow to bend the opposite way to get the new fuel line aginst the fire wall and run down under the Booster.
Finished product.
Last edited: