Oh crap...problem with lower manifold

Copperhead

"Cover me, Porkins!"
Established Member
Joined
Nov 11, 2002
Messages
489
Location
Knoxville, TN
So somehow, while pulling out the lower manifold, I failed to take note of where the tube that comes out of the bottom of it runs to. Can anyone help? I assume it runs to a PCV lines somewhere, but thought I better ask.

Any help, or pics, would be appreciated!
 

black03

Authorized Vendor
Authorized Vendor
Joined
Jul 4, 2002
Messages
8,247
Location
paradise
The tube runs out towards the rear of the motor in between the 2 large tubes of Boost and Vac lines. I found it easier to feed the rubber tubing through those black lines before I mounted the lower back on. Meaning with someone holding the lower just above the engine I ran the tubing and then set the lower down as there is a lot more room to work with. Then the drivers side of the T goes to the PVC that comes off the drivers side valve cover and I totally forget where the passenger side goes to but it should all line up. Hope that helps. Jared
 
Last edited:

Users who are viewing this thread



Top