Official BUILT 2V THREAD!!!!

[otownpj]

hopefully this isnt a rethread, i know there are some 2valvers on here.

post your 96-04 built 2v's, and show mods and pics, if your build is under construction, post anyway!

here is mine:

1999 gt

MMR 1100 w/ 04 cobra block
MPH stage 2 heads
Comp custom grind blowe cams
manley i beam pro series rods
cp forged pistons 9:1
bassani mid length headers
MAC O/R Hpipe
MRT cat back
MMR cryo oil gears
MMR sumped oil pan
MMR pt900(modded tko 600)
McCleod twin disc clutch
MMR Kmember w/ co's
tokiko illumina 5 ways
3:73's gears
18x10/18x9 saleens w/ nitto DR

full evolution motorsport watts link uninstalled w/ MM TA springs
also searching for an intercooled novi 2000 for this beast

future mods:

roll cage
recaros w/ harnesses
99-01 front bumper
cobra r hood
v6 rear bumper
31 splines w/ torsen diff
Sumped return style tank
ported bullitt intake
Lamotta tune
wilwood brakes
fresh paint
saleen wheels painted black

burnout
YouTube - stuntrider15's Channel

N/A i made 290/290

these V/C are now off and 4 sale!

 

[bullittbuild]

what kind of valve covers are they? and do they seal very well?

 

[otownpj]

IMO nothing seals better than the stock VC, they do seal but not as well. came from a company that went out of business, I paid $350 for them in 05

 

[slowgtnky]

I'd love to have a set of fabbed valve covers for mine....those would be sweet

 

[codip426]

2000 GT -

5.1L Stroker - Built Bottom end and stuff
Procharger P-1SC - Intercooled @ 6 psi
Long Tubes, Off Road H, Magnaflow Catback
Spec Stage 3 Clutch
Bilstein Shocks/Struts
Eibach Sportline Springs
03 Cobra Front Brakes
Bullitt 18x9/18x10, Nitto 555R's

Other stuff I'm probably forgetting.

Made 421rwhp/450rwtq

Future Plans:
D-1SC, or more boost, or both, Meth, New MAF...

 

[red97]

http://img821.imageshack.us/img821/2405/006dl.jpg
http://img685.imageshack.us/img685/6402/005hwb.jpg
http://img405.imageshack.us/img405/8366/032mf.jpg

mmr shortblock
stock heads
comp 278's.
Eaton stg 3 15psi w/ 2.81/6lb combo
26spline t56
built 8.8
list goes on...
510 /596 to the ground

short clip of 4th gear pull is in the tx2k10 1320 vid

 

[otownpj]

2000 GT -

5.1L Stroker - Built Bottom end and stuff
Procharger P-1SC - Intercooled @ 6 psi
Long Tubes, Off Road H, Magnaflow Catback
Spec Stage 3 Clutch
Bilstein Shocks/Struts
Eibach Sportline Springs
03 Cobra Front Brakes
Bullitt 18x9/18x10, Nitto 555R's

Other stuff I'm probably forgetting.

Made 421rwhp/450rwtq

Future Plans:
D-1SC, or more boost, or both, Meth, New MAF...

nice! d1sc will be sick! i like the bullitts on the front, they look deeper than most?

http://img821.imageshack.us/img821/2405/006dl.jpg
http://img685.imageshack.us/img685/6402/005hwb.jpg
http://img405.imageshack.us/img405/8366/032mf.jpg

mmr shortblock
stock heads
comp 278's.
Eaton stg 3 15psi w/ 2.81/6lb combo
26spline t56
built 8.8
list goes on...
510 /596 to the ground

short clip of 4th gear pull is in the tx2k10 1320 vid

incredible ride!!!

 

[aCiD]

Well I've never done a listing of the performance parts on my car, cause well, it's a daunting task. Here we go;

DSS SuperMod
DSS Main Support System
Bored 20 over
8.7:1 compression, x-grooved and notched pistons
Lightly touched up heads with the swirl thing removed and removal of casting flash and smoothing of the combustion chambers
Comp XE270AH cams
Comp beehive springs
Cloyes adjustable timing gears
Modular head shop thinned/lightened intake valves
ARP 2000 head studs
Fel-Pro Head gaskets
MM Caster Camber plates
BBK Gripp springs

Now the real good stuff;
Vortech V2 T-Trim
Reichard pulley
TKO-600
Custom 6-puck ceramic clutch with a RAM 3200lb pressure plate
Pypes long tubes, heat wrapped
Dual Walbro 255 pumps
60lb injectors
Professional products fuel rails
Giant intercooler
Dual nozzle meth injection
DeltaForce MAF
75MM TB/Plenum

@16psi with meth and 23 degrees timing it made 565whp, 400wtq

Made some big changes recently, going to see what I can do this time!

Tuned by me using Delta Force Sniper product.

 

[stangnutlx]

nothing spectacular but my 2V makes 502/440 rwhp

 

[SteedaGT]

My little GT. Bought her new in 04 and has been an on-going project that has taken many, many forms since. From all motor to nitrous to more nitrous to novi2000 to motor to turbo and from street car to drag car to street car to autox car to everything car.

-MPH built shortblock w/ Canton road race pan, windage tray, ARP heardware throughout, MMR oil pump, etc.
-ported heads w/ manley springs, ti retainers, oversized valves and MPH turbo cams
-ported Bullitt intake
-Meizere electric water pump
-full Aeromotive return style fuel system (sumped tank, eliminator pump, -10 feed, aeromotive rails, 60 lb. squirters, aeromotive regulator, fuel cooler mounted behind pass. side fog light hole)
-TurboCharged Innovations single turbo kit. Stainless steel hotside, alum. coldside. He's my neighbor, of course I let him work his magic on my car
-Precision GTQ 72 turbo w/ Tial 44mm gate and Tial 50mm bov
-Astro Performance built "bulletproof" T56
-McLeod RST twin disk
-Cobra alum. driveshaft
-Built IRS from an '03 Cobra (bruce's bushings, re-built diff., all braces from Billetflow and Steeda, etc.)
-MM sport valved Bilstiens and open track spec coil-overs all the way around
-AJE front tubular k-member
-'03 Cobra front and rear brakes
-'03 Cobra front seats and made-by-me rear seat delete housing 2 12" subs
-Mach 1 chin and grill delete
-'01 Cobra tails
-AFS 17x9 and 17x10.5 chrome '03 Cobra replicas
-etc, etc, etc....

Made 598 rwhp and 650 rwtq @ Real Street Performance on 15 lbs. of boost.

 

[YoungGun]

Motor is a 2v out of a 98 GT...

17 pounds of boost is 636 to the tires. I have a pulley for 28-30 pounds of boost but haven't tried it yet. Car has run a best of 9.34 at 145 with the 17 pound pulley.

 

[NasteeNate]

Badass 2v's!

 

[sc98cbra]

1998 Mustang Gt

Built by Underground racing

Vortech V1 S trim
535 Hp @ 14PSI
Long a$$ mod list.


The retard who filmed this, didn't know that the car actually ran a 7.9x and is running more that 6psi
[nomedia="http://www.youtube.com/watch?v=_FHUidofIWg"]YouTube- Stevos Blue Devil[/nomedia]

 

[tj4891]

Built 2v

2.1 kenne bell 10lb, for break in
mmr 900 long block
long tubes
stock heads
built rear with 3.73
430 hp for right now

 

[otownpj]

Well I've never done a listing of the performance parts on my car, cause well, it's a daunting task. Here we go;

DSS SuperMod
DSS Main Support System
Bored 20 over
8.7:1 compression, x-grooved and notched pistons
Lightly touched up heads with the swirl thing removed and removal of casting flash and smoothing of the combustion chambers
Comp XE270AH cams
Comp beehive springs
Cloyes adjustable timing gears
Modular head shop thinned/lightened intake valves
ARP 2000 head studs
Fel-Pro Head gaskets
MM Caster Camber plates
BBK Gripp springs

Now the real good stuff;
Vortech V2 T-Trim
Reichard pulley
TKO-600
Custom 6-puck ceramic clutch with a RAM 3200lb pressure plate
Pypes long tubes, heat wrapped
Dual Walbro 255 pumps
60lb injectors
Professional products fuel rails
Giant intercooler
Dual nozzle meth injection
DeltaForce MAF
75MM TB/Plenum

@16psi with meth and 23 degrees timing it made 565whp, 400wtq

Made some big changes recently, going to see what I can do this time!

Tuned by me using Delta Force Sniper product.

sweet ride bro!

nothing spectacular but my 2V makes 502/440 rwhp

nothing spectaculor? those are nice #'s

My little GT. Bought her new in 04 and has been an on-going project that has taken many, many forms since. From all motor to nitrous to more nitrous to novi2000 to motor to turbo and from street car to drag car to street car to autox car to everything car.

-MPH built shortblock w/ Canton road race pan, windage tray, ARP heardware throughout, MMR oil pump, etc.
-ported heads w/ manley springs, ti retainers, oversized valves and MPH turbo cams
-ported Bullitt intake
-Meizere electric water pump
-full Aeromotive return style fuel system (sumped tank, eliminator pump, -10 feed, aeromotive rails, 60 lb. squirters, aeromotive regulator, fuel cooler mounted behind pass. side fog light hole)
-TurboCharged Innovations single turbo kit. Stainless steel hotside, alum. coldside. He's my neighbor, of course I let him work his magic on my car
-Precision GTQ 72 turbo w/ Tial 44mm gate and Tial 50mm bov
-Astro Performance built "bulletproof" T56
-McLeod RST twin disk
-Cobra alum. driveshaft
-Built IRS from an '03 Cobra (bruce's bushings, re-built diff., all braces from Billetflow and Steeda, etc.)
-MM sport valved Bilstiens and open track spec coil-overs all the way around
-AJE front tubular k-member
-'03 Cobra front and rear brakes
-'03 Cobra front seats and made-by-me rear seat delete housing 2 12" subs
-Mach 1 chin and grill delete
-'01 Cobra tails
-AFS 17x9 and 17x10.5 chrome '03 Cobra replicas
-etc, etc, etc....

Made 598 rwhp and 650 rwtq @ Real Street Performance on 15 lbs. of boost.

u where at cars and cafe last week, i took some pics of your car, nice!

 

[SteedaGT]

u where at cars and cafe last week, i took some pics of your car, nice!

Yep! The engine shot is actually your's lol. Thanks.

 

[red97]

sweet rides everyone!

 

[saleenkid01]

built and stroked 2v
proccharger p1sc-2
p51 intake
75# injectors
shorty headers
fox lake stage2 heads
upgraded fuel system
537 rwhp on 12 lbs

couple build pics

 

[chip6990]

It's been a long project (11 yrs) still not finished. But I guess they never are. Well here goes nothing.

MMR 950 stroker 302
Fastlane Motorsports stage 3 ported heads
Comp Cams XE 268 cams
MAC long tube headers
Dr. Gas X-pipe
Flowmasters
Bullitt intake
Walbro 255 intake & 255 inline
42# inj.
RAM HD clutch
SCT flip chip
90mm LMAF w/MAFia
Procharger P1SC @ 10#
NX wet 75 shot

On 10# it made 485hp/470tq, 75 shot it made 550hp/600tq. The blower is dead at 10#. The curve is climbing fast till 5300 rpm's then it flat lines. Even on the N2O, it dies out bout 5500 rpm. I don't have any motor pics on my phone. I will try to post some later.

 

[otownpj]

Yep! The engine shot is actually your's lol. Thanks.

i was gonna say what a sick picture! will u be out this month?