no boost on gauge

[silverserpant]

Hey guys I was wondering if anyone has a photo of the driverside vacuum line routing as I put a new motor in my truck and the gauge is only reading vacuum. I checked the boost actuator and it is closed with key off and when runni ng fully opens and when the engine is reved it closes to the stop.

I am just wondering if I have the wrong referance hooked up to the gauge? the solenoid pink line is to the top of the actuator, lower line runs to the intake tube before throttle body. I have the red line on the fuel pressure regulator. and the straight black line over to the back of the booster where the line enters the cab.

Any photos or input would be greatly appretiated,

 

[voodoocustoms]

you need to get your boost recharged :burn:



The line for the boost gauge needs to be on the port on the side of the lower intake. look at the center of this pic.

 

[silverserpant]

I looked all over for canned boost and none of the stores had any on hand......

Thanks for the help, I got all routed right now thanks again to your photo