Nitrous guys chime in

[DerekDTP!]

I posted a thread a few weeks ago tryin to figure out the jetting for a 100 shot with a universal NOS kit. Well I got it installed, started with the jettings being 36/24, put down 475/532 on the rollers, it was about a 50 shot, wanting to up it to a 100. What jets do you suggest? Spoke with NOS already, they said a 47/22 but that doesn't sound right for some reason

 

[LITTLEMAGS]

47 sounds right....22 sounds wrong...

 

[LITTLEMAGS]

I run a NX kit...so mine are different

 

[Need4Speed03]

I would start with 52n and 28f...that's 100 shot to the wheels with most kits on the coyote using gas, and I'd run that with 1000 psi bottle pressure...you will be fine.

 

[cbrtrx]

An .047 jet is aprox 100 crank hp. A .052 is aprox a 100 rwhp shot on a single fogger setup. Depending if you are on e85 or gasoline your fuel jetting will be adjusted accordingly.

 

[kbrolly]

A .052 jet is a 100 shot according to the nitrous jet charts. I went on Google to find out the jet sizes, you can pull up the chart and find the exact jet size that you want. Good luck. And by the way, are you in Jax?

 

[DerekDTP!]

Yea but aren't the charts based off fuel pressure being at 43 psi? I believe our fuel pressure is 58 or 59 psi


Yuppppp, good ol jacksonville lol

 

[Need4Speed03]

On all the online calculators you put the nitrous jet size in, the bottle pressure, and the fuel pressure and it tells you what fuel jet to run.

52n / 28f is where you want to be for a 100 shot