I will be running the pulley that comes with the whipple which I believe is a 3.50'', billetflow idlers w/ newer style snub ( 3 100mm & 1 92mm ) a 4 lb metco lower kit and a 3.2'' alt pulley and a notched stock tensioner. Can someone with past experience please point me in the right direction, the good old search has left me hangin', thanks in advance for any info.
New whipple belt length help
- Thread starter 04SLOBRA1
- Start date
Thats pretty much the exact set up on my car and I run a gates part # ko80830.
Thanks for the reply, it was either your notch that got sold or a whipple with all supporting mods
You will love the Whipple. Another guy local here on the boards just did the Whipple too. Make sure your alt pulley is tight. Mine came loose at the track couple weeks back and it ruined the pulley & the alt bearing. Not to mention the belt. When you have the proper size get 2 and keep it with you just in case. :thumbsup:
I do, I keep an extra in the trunk w/ the tensioner tool.
TTT
TTT
anybody else ?
I ran a Dayco K080825 or a Gates K080830
Thanks for he reply, I was thinking either a 82'' or 82.5'' belt
any other experience fellas ?
up
crickets
Chirp chirp
ttt
Users who are viewing this thread
