new numbers with blower

[NXCaaabra]

new numbers with blower(PICS!!)

the car made differents numbers today...before it made 424 with 3.2 pulley

all started last weekend when the bolt back out of the blower pulley,and messed up the pulley bad, so i threw the 2.95 on it,and had it tuned today....

thanks brad and johnathan @ XXX motorsports once again for getting it done for me.....


she made 450 rwhp
and 391 tq
with 16 degrees of timming and only taking it to 6,500-6,600 which i usually take it to 7,000


im hopeing she holds up for a bit...since its my daily driver lol

mods are:

long tubes
o/r x-pipe
flowsmasher catback
imrc delete
4.10's
and p600b/p-1 procharger with intercooler
stock longblock

and heres pics of the car

 

[maniak87]

nice #'s :rolling:

 

[72 fastback]

oh yeah very nice

 

[ju015dd]

sweet numbers

 

[NXCaaabra]

thanks yall
ill try to get a pic of the dyno graph tomarrow....

 

[Red98CobraStang]

nice numbers. How many lbs of boost are you making? 10-11? I'm starting my intall of the KB the day after turkey day! epper:

 

[NXCaaabra]

12-13#'s, id have ask my freind, brad told me it made 474 fist pull at 6,600, then he just added some fuel and took timming out of it to help keep it together just a tad longer lol

 

[Gallows]

Very nice:rockon: Any vids of the Cobra that you can share?

 

[LowNSlowNeon]

Nice...

 

[Red Devil]

Are those normal tq #s for that blower? Seem a little low

 

[NXCaaabra]

Very nice:rockon: Any vids of the Cobra that you can share?

this is one from a few months ago when it made 424

http://media.putfile.com/Procharged-97-Cobra-vs-Vortech-02-GT-II

 

[NXCaaabra]

Are those normal tq #s for that blower? Seem a little low

yeah seem a little low to me also, i duno if its from it being detuned or what

 

[Cookieman00x]

Same numbers here. I have a lower comprssion ratio so I think thats why mine is low.. Do you have a P6 or p1?

 

[NXCaaabra]

Same numbers here. I have a lower comprssion ratio so I think thats why mine is low.. Do you have a P6 or p1?

prolly sounds dumb, but its a older blower, and it says p1 , but when i call procharger they say its a p600b, so i dunno lol

 

[notfastenuf]

Might need to get me one of those. :rolling:

 

[Red Devil]

I've got a 10lb pulley and I'm seeing between 8.5 and 9 lbs of boost. My numbers are with a conservative tune. At 12 lbs, I just figured you would be much higher

 

[NXCaaabra]

I've got a 10lb pulley and I'm seeing between 8.5 and 9 lbs of boost. My numbers are with a conservative tune. At 12 lbs, I just figured you would be much higher

it would if i took it to 7,000,and had more than 16 degrees of timing... it made 474 at 6,800 on the first pull...... but we kept it under 6600 ,and took alot of timing out and added some fuel.. so it will be safe, hopeing that the rods wont come out the blockoke:

 

[LowNSlowNeon]

About the TQ #s... on my vortech w/ 10 psi it dynoed 450hp and 407 tq....


The OP's car should haul ass though

 

[NXCaaabra]

About the TQ #s... on my vortech w/ 10 psi it dynoed 450hp and 407 tq....


The OP's car should haul ass though

yeah i think with mine making 10#'s before if i would have let them lean it out some i think i could have made close to that, i just wanted it to be safe as possible but make a little power.since its my daily, its only making about 11-12 right now at 6,600..

 

[351inside]

well mine made 396 or 386 ft lbs torque i believe at 8 psi...