new 4'' cowl hood on the stang

[fakesnake00]

 

[fakesnake00]

 

[fakesnake00]

dont mind the car its filthy bad snow in ohio lol

 

[mineralstangt]

Dude . . . ? What do you got under that monstrous hood to support such a bold statement?

 

[fakesnake00]

its just a little 408w : )

 

[iBiTe03]

4x4?

 

[fakesnake00]

yes i know it needs lowered i have the springs just havent installed them.

 

[mineralstangt]

A 408 Windsor? What's done to it?

 

[iBiTe03]

yes i know it needs lowered i have the springs just havent installed them.

get on it! lol

edit: might wanna keep the 4x4 till the snow is gone lol

 

[fakesnake00]

SVO 408w, scat 4340 crank, h-beams, afr205 heads, comp cams XE-282 roller, dual plane intake, 750 holly carb, 10-1 comp. hooker headers, flowmaster 40 mufflers

 

[Stopsign32v]

Its ok if you need the hood clearance. If its just for show, thumbs down.

 

[fakesnake00]

snows abt gone so im gonna work on it soon

 

[Stopsign32v]

SVO 408w, scat 4340 crank, h-beams, afr205 heads, comp cams XE-282 roller, dual plane intake, 750 holly carb, 10-1 comp. hooker headers, flowmaster 40 mufflers

Why such a mild 408? That is a tiny little cam for a 408 and the heads are on the small side too IMO.

 

[fakesnake00]

not really for clearence but its got a little power to back it up

 

[fakesnake00]

Why such a mild 408? That is a tiny little cam for a 408 and the heads are on the small side too IMO.

yeah i know i bought the motor done and the guy i got the heads and cam from had them on a 393 so yeah i need to get bigger

 

[Stopsign32v]

Sell the heads and get bigger heads. Sell the cam and get a custom cam or do your homework before getting an OTS cam. I almost ran that 282 in my 331! That cam is way too small for a 408!

 

[fakesnake00]

yeah, you think afr225 heads will be big enough for the 408?

 

[Stopsign32v]

Yea they will. Me personally, if I were you I would look at other heads.

If you are staying N/A or nitrous a set of High Port 245s would be nice. Or some Victors if you can afford them and the rockers.

 

[fakesnake00]

i was checkin out the new thump'r cam from comp and i was goin to find out some info abt that cam

 

[Stopsign32v]

Oh and just make sure you run some REAL exhaust on that car. 1 7/8" headers into dual 3" exhaust with straight through mufflers. No flowmaster crap. LOL

You should have all the power you want and the car should run mid 10's at 130+mph.