Need your opinions on sizes of tires and wheels!

[Doiz]

So I'm about to buy a new set of wheels and tires. I want to run 295 or 305 in the back, but I'm not too sure what width wheel and offset I should get. I'm getting something like Avant Garde M550 or Vossen CV3 etc, just wanna know what width wheel and what offset to get. I'm undecided on 19 inch or 20 inch wheels, and I'm lowered on a 1.5 inch drop. Is there a chart for this information anywhere lol? Tried searching for information on SVTP but couldn't really find anything. All help is appreciated, thank you.

 

[fivepoint0nick]

I'm in the same boat as you man. Looking to get the cv3s on 19x10 all around on 275 or 285. ill also be lowered 1.5 so i hope someone whos done this before has an answer lol

You're most likely going to need 10.5 width or 11 for 305, not sure what sizes vossen makes though.

 

[RC-5.0]

I don't know the exact answers, but I Can tell you this:

Ive run 2 different sets of 20x11's..one with a huge offset for big brakes, and my current ones with barely any offset and they just clear the stock calipers. You do not want less than 10.5 for that size tire, but 295 may go on a 10.5.. I would suggest 11 for 305 or 315 (lots of choices in 315).

My car is lowered 3/4 in the back and I have about 3/4 " left as a gap..that's with the 305/35. They do make rear springs with adj ride perches (Steeda and Revan Racing).

Hope some of this helps.
RC

 

[KG145.0]

if your planing on CV3s i pretty sure they are 10.5 with 45mm offset (at least for there 20s) so your best tire options would be a 295 35 20 or 305 30 20 if your lowered .. if you go any taller on a 305 you may rub. now if you get a 20x11 with a 50+ offset then you can run up to a 315 tire.... im running a 295 35 20 on a 20x10.5 with 45 offset and its pretty flush... hope this helps