so recently I picked up a vortech v1 kit for my car I recieved an 8 rib setup with it as well as 3 different pullies for the blower and an innovators west 8 rib 10percent od balancer my question is im a lil lost as to what size belt I need and what kind of boost I should expect from the different pullies one is a 3.6in on is a 3.125in and the other is a 2.something not I know right off the bat I wont be using the small pulley but don't know which pulley I should use the 3.6 or 3.125 im looking for somewhere around 8-10 psi for my stock bottom end the rest of the pulleys are sized as follows
water pump 5.5
alt 2.5
crank innovators west pn 804 10% od pulley
a/c is stock
power steering is stock
this kit is going to be an intercooled setup with a pmas blow through maf which is another question I have is it needs to be positioned where exactly? its in a straight tube but I don't know where to position it
water pump 5.5
alt 2.5
crank innovators west pn 804 10% od pulley
a/c is stock
power steering is stock
this kit is going to be an intercooled setup with a pmas blow through maf which is another question I have is it needs to be positioned where exactly? its in a straight tube but I don't know where to position it
