Need some help about DR sizes to run!

[SVTBoxer]

I have heard different things a few times about tire sizes that I can run so Im asking you boys for some help. I know I can run a 315/35 nitto DR on the stock 9 inch rim but what can I run on the stock looking rims that are 10.5 inches. Thanks for the help guys!

 

[mblgjr]

315's are the normal appropriate size for a 10.5" wheel. You might be able to get a 335 on there, but it will be bulging a bit.

BFG 315's are fatter than Nitto 315's, but using AFS 10.5 with either will require grinding the rear IRS bolt and spacers to prevent rubbing at full drop. You should be alright at ride height with stock suspension.

 

[SVTBoxer]

Does anyone know if anyone has came out with the a new IRS bolt yet or is grinding it down just what I need to do, I also plan to lower the car this summer just an inch or inch and a half.

 

[mblgjr]

Steeda offers some direct replacement button head bolts.

Otherwise, just grind the stockers.

 

[SVTBoxer]

Good looking out MBLGJR!!!!