I im in the process of swapping a tko into my 98 vert, The stock mounting brackets for the transmission cross brace is about 4 inches off. Does any one sell a cross member brace that would work? I looked around but I cant find any. I dont want to have to cut the factory mounts of and weld them in place because my subframes connecters are in the way.
Need quick help.
- Thread starter 98(oBra\/ert
- Start date
I think the stock brace out of a 03-04 Cobra might work
You need this.
http://secure-order-area.net/paulsh...page=510680&type=&frame=&cart_id=183284_11092
from paul
http://www.paulshp.com/
If you move the crossmember you will need a 1&1/4 spacer under the tranny mount to lift the tail back up. If you don't the pinion angle will be way off and you will have a horrible whine and do some damage.
http://secure-order-area.net/paulsh...page=510680&type=&frame=&cart_id=183284_11092
from paul
http://www.paulshp.com/
If you move the crossmember you will need a 1&1/4 spacer under the tranny mount to lift the tail back up. If you don't the pinion angle will be way off and you will have a horrible whine and do some damage.
Last edited:
Users who are viewing this thread
