Need help with broken pcv fitting on new supercharger

[Mr. Freeze]

So im in the middle of finally installing all my new goodies which includes
a 2.9 whipple and the pcv fitting on the inlet broke off. Is there anywhere
i can get one besides whipple since they are closed on the weekends? Or
is this a special item that i need to send in the inlet? I don't think so but i
would ask if anyone ran into this problem. I would use a brass fitting but
notice that they are special quick connect fittings that i would have to use i think?
any help would be greatly appreciated !!! heres a pic of the fitting.

 

[1320 Junkie]

Most likely whipple will be your best bet to keep that confuguration

 

[SCGallo2]

You need a 90 degree elbow fitting in that location, and it does not need to be a quick disconnect fitting. Your local hardware store will probably have one. Mine came with my FR/Whipple kit.

 

[1 Alibi 2]

The fittings on both my 2.9 & 3.4 are the same as the pic in post # 3.
The fitting you broke is incorrect & wouldn't fit anyway.
.

 

[1320 Junkie]

You need a 90 degree elbow fitting in that location, and it does not need to be a quick disconnect fitting. Your local hardware store will probably have one. Mine came with my FR/Whipple kit.

View attachment 48317

Ahhh good call...forgot the pcv fitting is 90* there for the lower intake hose.

 

[Mr. Freeze]

The fittings on both my 2.9 & 3.4 are the same as the pic in post # 3.
The fitting you broke is incorrect & wouldn't fit anyway.
.

I ordered one from whipple guess my install will have to be a little longer. Im in no rush other than the anticipation , lol.