i was cleaning the front cobra calipers on my 03 and was blowing off dust and managed to pop out a piston so do i need rebuild or just clean and put back together
PLEASE HELP
:beer:
You should be fine re-installing the pistons. Just make sure everything is super clean, lube the cylinder and piston with brake fluid and press them back into the caliper. Just keep an eye on them for a while for leaking.
Russell makes SS lines for both front and back. You can buy a kit for only the front brakes or the full set of four.
Max Motorsports sells SS lines, as well. They aren't branded as such, but they look like Goodridge. Here is a link to the front brake line kit.
I'm running the Russell lines in front and the MM lines on the rear brakes. They both work fine, and I've had no leaks from either.
The MM lines come with their own banjo bolts. MM specs the torque on these bolts at only about half what the factory banjo bolts require, so be sure not to over torque them if you decide on an MM kit.