Need Help Asap!!!

[so9956]

alright guys i am trying to clean my intercooler right now for a tune I have on monday and I have already stripped 2 13mm sockets trying to loosen the supercharger bolts. to loosen them you should be turning counter-clockwise right? need help, any suggestions greatly appreciated

 

[IneritaSVT]

Lefty Lucy, Righty Tigthy

 

[bgstew6]

you using a 6point socket or a 12pt...I dont ever recallin anyone stripping a bolt before...brakin them yes..not stripping them

 

[JeffsLightning]

Yep...use a 6pt. If your stripping the bolt heads be prepared to snap the bolts. Hopefully if that happens you will be able to get them out of the intake..Good luck..

 

[Illtaketwlight]

Get a long extension with a 13 mm on the end and smack it with a BFH. Then try to loosen them

 

[CHIZ]

Just leave it on until after the dyno tune...it would suck to get fudge something up and be able to get it tuned.

 

[so9956]

I got them off but holy s*** was it a PITA, thanks for the help

 

[WhiteLight01]

Where in La are you? Getting it tuned locally?

 

[so9956]

im in the metairie area, im gonna go to L&S and let vince tune it and put an oil separator on as well