My cousin and I just swapped clutch lines on my 2014 GT. It was a real pain trying to get at the part underneath the car. While we were taking the old line out from the transmission end, there was a black circular clip kind of thing that was flush against the transmission where the clutch line enters it. The clip came partially out, to the point we can't get it back in due to the little fingers or whatever you call them not fitting back in. The line is clipped in and secure at both ends. I've pumped the clutch about 250 times by hand and it's building pressure as there are no leaks. What I need to know is if anyone can identify this piece and if so, is it a problem that it is not seated flush like it originally was?
Here's the piece:
And here is how it was fitting originally:
Here's the piece:
And here is how it was fitting originally:
