My RWHP and Torque

[carguy19]

Hey guys,

I got all my parts and I am getting them all installed soon and going to dyno. I was just looking for what everyone with the same type of mods was making on their cars.



93 Octane fuel- Custom Tune SCT

15% ATI lower- Stock Upper-
Thump Tensioner-
FRPP Mono TB-
BPS- Plenum/Elbow-
JLT 127 intake
ARH 1 7/8 Long tubes with Off Road H pipe ---- Stock Cat back.
NGK plugs
3.73 Gear

What do you guys think for RWHP and TQ ?

 

[Ghoust]

700/700

 

[carguy19]

700/700

I hope you are light man.

I am hoping for it to be 5-7% higher. :idea:

 

[Softballer77]

740/755

 

[93 347 Cobra]

I'd guess 720-740 on both hp and torque.

 

[VFORCEJOHN]

735-740 pending fuel and timing

 

[lilredcoupe]

How much boost should you expect with this setup?

 

[paluka21]

Is "you know who" tuning the car? :lol1:

 

[1 Alibi 2]

What did your car baseline @ and who is doing the tuning ?

 

[carguy19]

What did your car baseline @ and who is doing the tuning ?

No baseline yet.

Not sure on tuner yet. Still working on getting install setup and scheduled.

Alibi, I think you have a similar setup on your 13 car right? What did your car make?

 

[biminiLX]

Well, I don't have a Dyno number for you but I do have a 137.4 trap mph to assure you it will make plenty on 93.
I have the same pulleys, same elbow, BPS TB, 1 7/8" headers to o/r 3" exhaust and 4.10 gears.
Mine makes 20psi stock gauge all day and I'm expecting at least 750rwhp when I Dyno soon, but we should be very close.
It'll make you grin guaranteed
-J

 

[carguy19]

Well, I don't have a Dyno number for you but I do have a 137.4 trap mph to assure you it will make plenty on 93.
I have the same pulleys, same elbow, BPS TB, 1 7/8" headers to o/r 3" exhaust and 4.10 gears.
Mine makes 20psi stock gauge all day and I'm expecting at least 750rwhp when I Dyno soon, but we should be very close.
It'll make you grin guaranteed
-J

The only difference from your car to mine is the 4.10 gear, and the fact that you have a port on your blower and plenum.

Its too bad that you didnt live closer, I'd pay you to port my blower and elbow.

 

[biminiLX]

Ported blower not on yet and as of today, rear gears are 3.73s with 33-splines ;-) .
-J

 

[1 Alibi 2]

No baseline yet.

Not sure on tuner yet. Still working on getting install setup and scheduled.

Alibi, I think you have a similar setup on your 13 car right? What did your car make?

.
We have the same year car &
.
Thump Tensioner-
FRPP Mono TB-
---- Stock Cat back.
3.73 Gear
.
My tuner saw 818 before backing it down to 780. ( his safe level with a stock bottom end )

 

[carguy19]

.
We have the same year car &
.
Thump Tensioner-
FRPP Mono TB-
---- Stock Cat back.
3.73 Gear
.
My tuner saw 818 before backing it down to 780. ( his safe level with a stock bottom end )

I always forget you have the "non-stock" supercharger on yours