So I just ordered msd 2 step from AM. Where are u guys mounting the box? And I want the 2 step to work off clutch pedal what do I need to do?
MSD 2 step install
- Thread starter BADSEED
- Start date
I've seen it under the hood, by the brake booster.
For the switch, you will need a nitrous WOT pedal switch. Have the switch apply ground.
So i cant splice into clutch wire?
Id either use brake for an auto or clutch for stick.
If you use wot you have to use one of the other methods anyways. Unless there's something I'm missing I don't see how it would work off a wot alone.
If you use wot you have to use one of the other methods anyways. Unless there's something I'm missing I don't see how it would work off a wot alone.
Just have a dash switch for the power, and apply ground with a wot switch on the clutch. No splicing required. Same way you would wire it up with a transbrake.
So i wired blue/white wire to green black wire and it will not work. I did not use a wot awitch could this be my problem
I understand now what he meant by a wot switch. Use the switch on the clutch pedal instead of the gas pedal.
Nothing to do with your problem but it is another way of wiring it up instead of tapping into factory wiring.
Nothing to do with your problem but it is another way of wiring it up instead of tapping into factory wiring.
I figured problem out, wire was making good contact. She work great not just hard to move around on the floor
Users who are viewing this thread
