Well seems like lots of people were interested in my build on svtp so I thought I would update you..
Motor build thread here
Original turbo install here
Part 2..
Installed
-AEM ems/3 bar/iat
-CRW axle cages
-850cc low impedance injectors
-HKS 264 intake cam
-Kelford 258 exhaust cam
-Berk 3" dual exhaust
-Fidanza cam gears
-Powdercoat valve cover, tial wastegate, engine brackets
-Wire tuck
-Fuse box, resistor packs, fan sensor into trunk
-Relocate battery cable
-Custom catch can and coolant overflow setup
-Custom AN lines to catch can
-Custom fuel lines
Coming very soon
-Trunk mount intercooler, flat black pipes
-ATS intake manifold
-Custom meth injection kit by me
Install time
valvecover off
junk
Harness before(needed to be extened 3 feet all soldered
Afpr location, waiting to get manifold on to route lines to fuel rail
Cleaned the side up, also removed egr pipe, relocated fuel tank breather, re-routed some lines, now nothing is there! (coolant neck is next). Also this is a before picture for my custom catch can and overflow next.
Relocating brake booster, cleaned it up a bit
One Recaro in, one more to go. I desperately needed seats, my oem seats did'nt have any upholstery whatsoever. These are very snug! I dont like the red to much but I bought both in great condition for $500
Harness in progress (I did around 120+ solder connections)
Wideband location, oem location boost gauge. Trying to keep it clean
Hacked up connector I had to repin/solder
After..
New oil cap! Anodized black instead of plastic junk
More pictures to try and get a better idea of the shade..
Tial and valvecover just sitting
No more reverse lights
Some videos and pics to come. Trying to finish installing everything today. Hopefully start it later this week.
Really want to hit 400's with meth, without high 300's I guess. Now that everything is up to par a 35r is the plans for next year 600hp+.
Picked up some 15's to get some slicks as well.:burnout:
Motor build thread here
Original turbo install here
Part 2..
Installed
-AEM ems/3 bar/iat
-CRW axle cages
-850cc low impedance injectors
-HKS 264 intake cam
-Kelford 258 exhaust cam
-Berk 3" dual exhaust
-Fidanza cam gears
-Powdercoat valve cover, tial wastegate, engine brackets
-Wire tuck
-Fuse box, resistor packs, fan sensor into trunk
-Relocate battery cable
-Custom catch can and coolant overflow setup
-Custom AN lines to catch can
-Custom fuel lines
Coming very soon
-Trunk mount intercooler, flat black pipes
-ATS intake manifold
-Custom meth injection kit by me
Install time
valvecover off
junk
Harness before(needed to be extened 3 feet all soldered
Afpr location, waiting to get manifold on to route lines to fuel rail
Cleaned the side up, also removed egr pipe, relocated fuel tank breather, re-routed some lines, now nothing is there! (coolant neck is next). Also this is a before picture for my custom catch can and overflow next.
Relocating brake booster, cleaned it up a bit
One Recaro in, one more to go. I desperately needed seats, my oem seats did'nt have any upholstery whatsoever. These are very snug! I dont like the red to much but I bought both in great condition for $500
Harness in progress (I did around 120+ solder connections)
Wideband location, oem location boost gauge. Trying to keep it clean
Hacked up connector I had to repin/solder
After..
New oil cap! Anodized black instead of plastic junk
More pictures to try and get a better idea of the shade..
Tial and valvecover just sitting
No more reverse lights
Some videos and pics to come. Trying to finish installing everything today. Hopefully start it later this week.
Really want to hit 400's with meth, without high 300's I guess. Now that everything is up to par a 35r is the plans for next year 600hp+.
Picked up some 15's to get some slicks as well.:burnout: