Mondo valve installation?

[chris 96cobra]

Hey guys I have a question. I have a 96 cobra with a vortech v-3sci and want to use a Anderson power pipe with a mondo valve. But want to say the power pipe doesn't have the correct fitting adaptor. Have any of you used this combo, if so what modifications did you have to make? Thanks in advance

 

[Blown_By_You]

You need the mondo valve Flange welded on to the discharge pipe and a 2" nipple welded on to the power pipe

 

[Cookieman00x]

I vent to atmosphere with an air filter to quiet it down but blown-by-you is correct, you would want a flange welded on within 10 inches of the blower on the discharge and a 2" inlet welded to the power pipe (unless you don't re circulate the air)