mmr 4.75 stroker install help

[recky2000]

In the mmr manual it says just to install hexagonal spacer for oil pickup tube. I have read that ARP says to cut .070" off the pedestal spacer. Do I have to do this or not.

 

[03Cobrra]

I didn't do it and I don't see why you would have to.

 

[cobra=trouble]

4.750 or.3.750 stroked crank?

 

[dark-knight]

i never did that with my MMR 4.75L either.

 

[recky2000]

ARP main studs requires to have the spacer cut by 0.070". I have measured the gap between the oil pickup screen to oil pan and found it 0.300". I think it should be between 3/8" to 7/16".

 

[Quick Strike]

ARP main studs requires to have the spacer cut by 0.070". I have measured the gap between the oil pickup screen to oil pan and found it 0.300". I think it should be between 3/8" to 7/16".

.375"-.500" = range for Canton pan.