MM camber plates install help!!!!

[lons13]

I will be installing maximum motorsports plates on my 04 cobra. I cut 3/4 of springs in front and rear. Do i set the spacers on the strut for stock ride height or 2 inch drop as stated in the instructions? Also do i set the position of top plate inward or outward setup? Car is a street car not a race car. All the help is greatly appreciated.

 

[starnsey]

You'll want to install them in the "positive" orientation (with the radius side pointing to the outside of the car) and you should go ahead and set the spacers up for lowered cars. See page 3 & 4:

http://www.maximummotorsports.com/Assets/install/pdf/front_susp/MMCC9994v4r8.pdf