Miscellaneous Terminator Parts

mdrc347

Member
Established Member
Joined
Jun 8, 2009
Messages
285
Location
Bloomington, WI
I'll try this again. I missed rule #7 last time.

I sold my terminator 6 months ago, and I'm cleaning out my garage of parts I have laying around my garage for it. The car had 38,000 miles on it when the stock parts were removed. They could use a good cleaning as they have been laying around my garage for close to 10 years, but they are all in great condition. All items will ship the next business day after they've been paid for. Shipping is included on all prices. I've deleted the items that have already sold since posting this yesterday. Thanks guys. I'm pretty firm on my prices, but feel free to make an offer on anything you think may be too high. I think everything is priced to sell.

Tires only. Rims are sold. Tires are 28 X 10.5 - 15S Mickey Thompson that are about half wore. There is an 1/8" left in the wear holes. They are well broke in with probably between 40 and 50 passes on them and they hook great. They are 4-5 years old. $160.
18557452_1922287491389276_2138922703623305238_n.jpg


rule #7
18622567_1923007981317227_3421313552783452869_n.jpg


Stock shifter. Great condition. $40.
18557209_1922286904722668_8995460505225990800_n.jpg

18664411_1922286851389340_5256651860475192790_n.jpg


Stock blower inlet. $65. I'll do $60 if it's purchased with the TB below.
18622479_1922286781389347_4835952091008821013_n.jpg

18620412_1922286711389354_486480009456591553_n.jpg


Stock throttle body. No TPS. $85. I'll do $80 on it if it's purchased with the blower inlet above.
18582151_1922286538056038_358929058586765735_n.jpg

18582319_1922280924723266_4812431627638901381_n.jpg


No brand on this. I believe it is URD. Might be an old Billetflow? 2.76 supercharger pulley. One piece. $50.
18557483_1922280808056611_7641646941912998935_n.jpg


Metco 2.90" supercharger pulley. Quick change ring only. No center hub is included. $40.
18589146_1922280588056633_2081561905058216234_o.jpg

18671767_1922280548056637_6558434054968831188_o.jpg


Stock fuel pump driver module. $40.
18556143_1922280214723337_6418628815097731737_n.jpg


EGR DPFE sensor including mount. $40.
18620879_1922286588056033_2105235679067898195_o.jpg


I have other items that I have posted in the other vehicles section as they will fit more than just the cobra or are for other vehicles entirely. Thanks for looking.
 
Last edited:

mdrc347

Member
Established Member
Joined
Jun 8, 2009
Messages
285
Location
Bloomington, WI
Adding to this as I can. Here is a few more items I'm looking to sell:

Roll cage parts: Both door bars, passenger door bar floor mount, and removable crossover bar for the main hoop. Passenger door bar and mount are not painted. The other 2 are painted charcoal and covered with charcoal foam. $100. I will not separate these.
18556328_1922287021389323_3931273360539875696_n.jpg

18582220_1922280094723349_6576250332416967488_n.jpg


31 spline straight axles out of a 03 Mach 1 for 8.8 inch rear end. $85.
18582482_1922286961389329_153756606867697588_n.jpg


Tach adapter for aftermarket Autometer tachometer. I think this would work on any aftermarket tach. Gets rid of low RPM fluctuation that is present without it. Never installed. $50.
18622275_1922280141390011_1737349400882204340_n.jpg
 

mdrc347

Member
Established Member
Joined
Jun 8, 2009
Messages
285
Location
Bloomington, WI
Adding to this as I can. Here is a few more items I'm looking to sell:

Roll cage parts: Both door bars, passenger door bar floor mount, and removable crossover bar for the main hoop. Passenger door bar and mount are not painted. The other 2 are painted charcoal and covered with charcoal foam. $100. I will not separate these.
18556328_1922287021389323_3931273360539875696_n.jpg

18582220_1922280094723349_6576250332416967488_n.jpg


31 spline straight axles out of a 03 Mach 1 for 8.8 inch rear end. $85.
18582482_1922286961389329_153756606867697588_n.jpg


Tach adapter for aftermarket Autometer tachometer. I think this would work on any aftermarket tach. Gets rid of low RPM fluctuation that is present without it. Never installed. $50.
18622275_1922280141390011_1737349400882204340_n.jpg

Roll cage parts are for a maximum motorsports cage.
 

Cooldbz12

Member
Established Member
Joined
Dec 8, 2006
Messages
39
Location
fs, Tx
How many passes on the axles? also can you point me to a link where they sell the exact ones your selling. thanks.
 
Last edited:

mdrc347

Member
Established Member
Joined
Jun 8, 2009
Messages
285
Location
Bloomington, WI
How many passes on the axles? also can you point me to a link where they sell the exact ones your selling. thanks.

I've never used them, so I couldn't tell you how many passes. They are definitely used. They came with the car when I purchased it. I have no idea why, but Superior has kind of fallen off the face of the earth over the past few years. See this link:
http://www.pirate4x4.com/forum/gene...dead-out-business.html#/topics/1256378?page=1

It's sad. Great product, but apparently they've had or are having issues. The closest thing I've seen to what I'm selling is at this link but it's not exact:
https://m.summitracing.com/parts/sag-pa5202

Googling Superior Axle and Gear will reveal more info about issues they are having with customer service and product availability. It will also reveal that these may be rebranded Foote axles. See link below for their website:
http://www.footeaxle.com

I would not buy these if you're looking for great product support. I will drop the price on the axles to $65 including shipping after researching this. These would be more like just good cheap axles to get into or ones to have for spares. I'm guessing they were probably about the same price as the axles in the link above that Summit is selling new as those would be very similar.
 

Users who are viewing this thread



Top