Mid-pipe question (2 part)

[04DSGAZMACH]

Hey guys, I have a question or two and need some insight and opinions. First my car is an 04 mach 1 with a JLT RAI and Flowmaster 40 weld-ins. Will a BBK O/R X-pipe or a mac pro chamber bolt up to my existing stock exhaust since the stock exhaust diameter is 2.25"? Second Which should I go with if the answer is yes to the above question, Prop chamber or BBK X?
Thanks

-Tim

 

[4a7191a]

it will, ball and socket joints rule.

 

[mbucky16]

I think it will bolt on just fine. Im not a fan of X pipes because they tend to be too raspy in my opinion so between the two, I'll go with the prochamber

 

[03machme]

It will and of the two I say prochamber. I had the same mufflers on my old Mach with an O/R H and LOVED it. Here is a video of what it sounded like. just a suggestion

http://vimeo.com/1938763

 

[04Mach1Blurr]

It will, when your doing the work, take one of the positive or negative battery cables off the battery so you don't accidentally send sparks flying if you hit the starter. Extensions, elbow sockets, and wd-40, and an extra wrench or ratchet with a socket for the mid pipe / catback connection. Also the correct size wrench for the O2 sensors

 

[04DSGAZMACH]

Thanks guys. 03machme, your setup is exactly the sound I am looking for and 04mach1blurr your car is sick! are those 17" Fr500's?

 

[04Mach1Blurr]

Thank you, yup they are 17x9/10.5 Silver with a polished lip FR500s. Hope your mid pipe install goes well!

 

[04DSGAZMACH]

Thanks! I am going to go anthracite 17x9/10.5 FR500s on my mach after I lower it.

 

[03machme]

Thanks guys. 03machme, your setup is exactly the sound I am looking for and 04mach1blurr your car is sick! are those 17" Fr500's?

Then go o/r H you will thank me

sent on the mobile using an app thingy

 

[4a7191a]

i went from a prochamber to an xpipe. check out lethals stuff and vrsexhaust as well. they both have good stuff.