methanol usage question

sabredog

New Member
Established Member
Joined
Apr 23, 2006
Messages
85
Location
newark, delaware
i used to use a meth kit on my 89 tta with great results,23 psi and 25 degrees of timing on 93 octane.has anybody run an unported eaton at 17 psi w/alky and 20-23 degrees of timing.iat2 numbers should be down significantly and the alky increases the octane of 93 premium.i was very suprised to see so many cobra owners that say alky doesn't work.it sure worked wonders on my tta.thanks for any input.
 

GodStang

Well-Known Member
Established Member
Joined
Aug 20, 2003
Messages
14,723
Location
Aiken, SC
It works on Centi and turbos but does not work on positive displacement blowers. I think the average hp gain on a Terminator is like 3 hp. Lot of stuff on this just do a search.
 

sabredog

New Member
Established Member
Joined
Apr 23, 2006
Messages
85
Location
newark, delaware
you gain your performance from setting your car up like it going to run on 110 octane.run a more agressive tune,more timing,lean it out for the addition of the methanol and run more boost.after talking to julio ,the owner of alky control,he reminded me of the benifits of the increased octane and cooling effect methanol has on any forced air application.
 

Users who are viewing this thread



Top