meth install ?'s

[98svtconvert]

2 questions. where did those of you running meth injection tap in for power. if you happen to have a pic, that would be even better. second, the yellow wire is used to run the kit off the maf but it doesn't tell me which wire to tap for the signal. this is on a 98 cobra. any help would be great. thanks.


Justin

 

[20+psi]

2 questions. where did those of you running meth injection tap in for power. if you happen to have a pic, that would be even better. second, the yellow wire is used to run the kit off the maf but it doesn't tell me which wire to tap for the signal. this is on a 98 cobra. any help would be great. thanks.


Justin

1. Either the fuse or relay box for power supply.
2. You need to put a meter on the maf and find the wire that increases in voltage when the throttle is opened, that is your signal wire.