Manley Platinum series pistons for a .020 over bore (3.572), -6.5cc dish. The PN in 594320C-8 and they can be used in a 2V, 3V or 4V. I used these in my 03 Cobra with stock rods, stock crank and stock heads and my compression ratio was right at 9.8:1. I went 9.29 in the 1/4 mile with these pistons and they have performed exceptionally well for me. Only reason for selling these is because i'm building another engine. Otherwise i'd use these again with no hesitation. All you need is a new set of wire locks for the wrist pins (P/N 42270) that cost $10.
If you order these pistons from Manley, they run $819 and come with .150 wall chrome moly pins... I have the upgraded H13 Tool Steel .200 wall pins included with the pistons.
Asking $350 obo
I polished one up to show how good of condition there in
If you order these pistons from Manley, they run $819 and come with .150 wall chrome moly pins... I have the upgraded H13 Tool Steel .200 wall pins included with the pistons.
Asking $350 obo
I polished one up to show how good of condition there in