Making my own heat exchanger fan harness. Couple connector questions.

[50stangpower]

So I picked up a VMP HX with fans but no harness. I think I'm going to just build my own harness vs paying $150 for theirs. My question is as follows:

It looks like the older hx pump connectors are EV1 Style. Does anyone know if the 2013 is the same?

Also does anyone know what the SPAL fan connector types are?

Thanks!

 

[50stangpower]

bump

 

[Catmonkey]

The Pierburg pump uses a different connector than the Bosch pump used in the 07-12. You can purchase a pigtail from Ford under part no. CU2Z14S411AYA. Summit seems to have the harness connectors for the fans, but they're not cheap.

 

[50stangpower]

thanks for the help. yes I found those on jegs for like $10 each but it looks like a simple GM connector I believe

 

[SCGallo2]

My SPAL fans came with documentation stating that the fan relay harness part# is FRH. This link may have the info you are looking for (read the notes): https://webstore.spalusa.com/en-us/...ns/fan-accessories/frh/fan-relay-harness.aspx

This may also help with your install:

 

[50stangpower]

Thanks Steve. I think I can make it just as nice and save $75.