Lower Blower Pulley Torque specs? Help Please

[JSHTROD]

Is there a specific procedure in torquing the lower blower pulley down?

:shrug:

 

[badboy]

What's a "lower blower pulley"?

 

[JSHTROD]

What's a "lower blower pulley"?

There are two pulleys that drive the supercharger.

The upper one mounted to the supercharger, and a lower pulley mounted to the crank.

;-)

 

[FordFreak]

Pulley brace- 18lbs
Pulley itself- 74lbs.

 

[JSHTROD]

Pulley brace- 18lbs
Pulley itself- 74lbs.

THANK YOU!

 

[FordFreak]

THANK YOU!

youre welcome.
:beer:

 

[IronTerp]

With the interchangeable lower kits, you torque the hub to harmonic balancer bolts (3)to 35 ft lbs and the ring to hub bolts to 20 ft lbs. And I would tighten the 6 ring bolts in the same sequence you would do a wheel.

 

[JSHTROD]

With the interchangeable lower kits, you torque the hub to harmonic balancer bolts (3)to 35 ft lbs and the ring to hub bolts to 20 ft lbs. And I would tighten the 6 ring bolts in the same sequence you would do a wheel.

I'll be re-installing the stock pulley.



Jason

 

[IronTerp]

Oh, don't know what the main hex bolt is torqued to on the stock setup, but it's a ton! I know it took some heaving to get it off. I'd say 150 ft lbs minimum.