Low Miles 1997 Cobra Build

[Luis97Cobra]

What size blower is that ?


Look at this build thread its more in detail thanks !

https://www.svtperformance.com/forums/threads/low-miles-1997-cobra-build.1151066/#post-15753791

 

[Mike Morris]

Awesome!

 

[Luis97Cobra]

 

[Luis97Cobra]

 

[Luis97Cobra]

 

[Luis97Cobra]

 

[Luis97Cobra]

 

[Luis97Cobra]

 

[Luis97Cobra]

 

[Luis97Cobra]

Engine:
97 B-head’s OEM Fully Assembled Heads are boxed up ready to ship for Headwork if wanted.
Original Crankshaft is boxed up
OEM Teksid Block is boxed up as well
No Pistons or Rods
Fully ported B-headed intake
Fresh Vortech Si-trim with 3.1” pulley
Huge Turbonetic FMIC and custom piping
Procharger Big Red open bypass valve
Custom Blow thru VMP MAF
60# SD injections
Accufab Race TB
Custom Andersen power pipe powder coated silver
Custom Oil catch can
Red Monster COP harness
03 Cobra coils
BGG 8 rib setup
Innovative west 10% OD crank pulley
Canton steering tank
Water pump
Alternator
Vortech Coolant Crossover
Canton Oil Pan Road Racing
Custom powder coated valve covers and coil covers and all hardware
Aeromotive fuel rails
Custom hardware for the engine all stainless steel
Everything else you can think of to assemble the engine once you have the long block
MMR IMRC Delete plates
FIORE firewall adjuster
Steeda Quadrant Adjuster
All Harnesses for the engine
Custom Alky Meth kit
Custom fuse panel for gauges
SCT Programmer


Brakes/Spindles/Hubs:
Power-slot Front rotors
Hawk HPS Pads
MM SS braded lines
Speed bleeders
New Motorcraft hub nuts and hub dust caps
SS guide pins and anti-rattle clips
New OEM Powder coated dust shields
Powder-coated Cobra Calipers and Brackets. (Mirror Red)
Powder-coated spindles
New Timken Hubs with ARP studs
Power-slot rear rotors
Powder-coated rear cobra calipers and brackets
Hawk HPS pads
JM SS rear brake line and bango bolts and washers
Speed Bleeders
New Military Grade Socket head bolts and brackets
OEM Brake shields powder-coated silver with ss hardware
SS anti-rattle clips
Centric Calipers Rebuild Kits
Duralast Brake hardware kit
Motorcraft Caliper Grease
New E-brake Brackets and ABS sensorwire holders. All Powder-coated


Front Suspension:
Maximum Motorsports K-member with control arms
MM Bilstein HD struts/coil-overs with 300lb springs
MM Caster Camber plates
MM Bump-steer kit and solid rack bushings
Powder coated front sway way and brackets
New bolts and hardware
Brand new OEM 04 Cobra Rack and Pinion
Upgraded custom bolts


Rear Suspension:
MM Extreme duty adjustable LCA’s