Looks like Cobra's are on the Endangered species list year

[dasmopar]

Made it to the dyno today got it tuned in on 28 psi. Had to do all of the tuning on the dyno due to the rain this weekend. We are pretty happy thus far. Going to check everything over on the street sometime this week (weather permiting) and see if any changes need to be made.

This is without water meth and without the N20.
Seems over the winter something happen to my H20 injection and the hobs switch doesn't seem to be activating the system ( hey who knew the cars been back together a week 300 Miles on motor as of today)

As luck would have it My N20 wouldnt fire the fuel side looked like it would and the purge works but not the N20 ( talk about bum luck so we will be attacking it this week and finish dailing it in on the street getting ready for the SRT-4 nats @ norwalk May 19th.

So far I'm very happy with the cars numbers, how its spooling and where its making power.

Mods can be found below along with pictures. let me know what you all think

Thanks

Lon
AKA "Mongoose"

Eagle rods.
Weisco pistons
Stock head gasket
Clevite bearings
DCR billet oil pump

Larry Fully ported Head
1mm over Intake valves
3mm over Exhaust valves

AGP Monster race FMIC
AGP Turbo kit New turbo for testing
N0S pro fogger kit Range 80-How much do you want
Cooling mist water meth

Ndswngs side exit exhaust

Kirkey seats
6 Point bar

ACT clutch
26X8.5X15 slicks

Dtec thingy
stage 1
RC750
Return line
Bottleneck fix
Tuned by Vector and Dasmopar



See it at the may 19th Norwalk SRT-4 Nats

 

[dasmopar]

 

[postban]

and I remember when it was stock.........

nice modlist bud, btw, you cannot be the mongoose, no WAY!

lol

 

[03gobluecobra]

Dang, not bad at all. How are you expecting it to hook up with the FWD and all? What kind of suspension mods do you have? I can barely get my 215whp cobalt to hook. I can't imagine trying to get that to hook.

 

[dasmopar]

Well I have control arm bushings. Those help ALOT!! motor mounts, another big issue just like a cobalt. Ground control coilovers and 26 x 8.5 x 15 slicks. I went 1.69 60ft times last year on a smaller tire so we shall see if the power is to much for the new bigger tire or not.

Dave I remeber you're first cobra (not scratchy) being close to stock aswell. It's been a fun trip so far. keep in mind Mongoose eat snakes and a viper is a snake too right?

 

[Blue03]

Lon, is that the same turbo that Jeff is using? Man, that thing is really pumping it out. If you hook should be 10's for sure. Good luck man. :thumbsup:

 

[dasmopar]

It's the same size but he has a little nicer one. The DBB turbo should spool better but right now we think my head work is spooling my laggy turbo pretty good.

 

[Blue03]

The DBB turbo should spool better but right now we think my head work is spooling my laggy turbo pretty good.

I would say! Geat job man, keep us informed on what she runs.

 

[JP]

Good to see all your hard work paying off Lon.
I fear the Mongoose!!!!!!!!!!!

i need to make you some kinda cool Cobra kill plate, Where you can record your kills this summer.

FEEEEAAAAAARRRRRRRRRRR the Mongoose.

JP :beer:

 

[dasmopar]

Maybe some little cobra and Viper stickers?????

 

[ilumo]

IS that on the stock block?? looks good man!

 

[dasmopar]

Stock block yes, everything else? No!

There NO replacement for Cubic Inches.....of AIR.

I like that LOL!!^^^^^^^^^^

 

[dasmopar]

Well I let Vector run my car so he can check it out and he beat my time in it. He got a 11.006 @ 128mph out of it VS my 11.112@ 117.xx

 

[03gobluecobra]

He beat you by 11mph?

Was this with or without the nitrous/meth? That sure is close to 10's. You'll be there soon.

 

[ilumo]

sounds like he let off before the end..?? wow... nice setup though

 

[Jpjr]

now that i'm #1 on my dealer's list for the first Solstice GXP allocation this Fall, i too will be venturing into the world of high boost four bangers. looking forward to it, great looking SRT man!