Lightning Blower snout

[Snakey03]

does the front of our eatons interchange w/ the lightnings???
a friend bought a whipple for his L and said i could swap front snouts w/ him!!! neither of us have a pulley puller, but he said
the fronts will swap. what boost would i see with a L pulley and what belt should i run???? thanks in advance.........Greg

 

[dynobobstieg]

You can swap the eaton front snouts. You may want to call Kurt at Stiegemeier Porting

 

[ChicagoMike]

It can be done, it's just like a pulley swap, but you're changing the entire snout. Changing out the snout is far more complicated:

Blower snount replacement (taken from a vendor):

It comes with a pulley, synthetic oil, anaerobic sealant and coupler along with complete instructions. It's worth an add'l 50+ horsepower, 75+ lb/ft torque, and adds 4-5 PSI boost. On the '03-'04 Cobra it works best with an Air-to-Water Heat Exchanger w/ Dual Fans and we highly recommend a Custom Tune (chip or ECM flash program). WARNING: This will VOID your factory warranty from Ford.

I would still contact Steigemeirer, they do tuning and blower work.