Lightning Force Performance is please to announce our Direct Flow Head Cooling Mod. The Stock Driver's side Head on 03-04 Cobra Mustangs (and most DOHC 4.6L Applications) runs hot. This is because of Ford's failure to provide adequate cooling to the #7 and #8 cylinder jackets on the driver's side head creating hot spots/steam pockets in and around the cylinders (aiding in potential detonation). By creating a direct cold path from the radiator to the hot cylinders, coolant flow in this area in increased dramatically.
The LFP Direct Flow Cooling Kit consists of a precision machined stainless steel fitting, custom fabricated Aluminum Coolant T along with the High Temp Heater Hose and adapters to connect the two. The Stainless Steel fitting is installed in the rear Coolant Jacket on the Drivers Side Head and the Aluminum "T" is installed at the upper Radiator Hose.
Once this modification is installed, both cylinder Heads will be flowing coolant through a restriction averaging .350, thus maintaining Direct Cold Radiator fluid through both heads.
This kit can be installed from the top of the car, with the Blower Removed. Does NOT require removal of transmission.
Every cooling "T" is pressurized in a test fixture at 20-25 PSI to ensure there are no leaks at the weld joint prior to shipping.
Brand New In Box - $100 Shipped
PayPal Only - If you pay by Credit Card add 3%
The LFP Direct Flow Cooling Kit consists of a precision machined stainless steel fitting, custom fabricated Aluminum Coolant T along with the High Temp Heater Hose and adapters to connect the two. The Stainless Steel fitting is installed in the rear Coolant Jacket on the Drivers Side Head and the Aluminum "T" is installed at the upper Radiator Hose.
Once this modification is installed, both cylinder Heads will be flowing coolant through a restriction averaging .350, thus maintaining Direct Cold Radiator fluid through both heads.
This kit can be installed from the top of the car, with the Blower Removed. Does NOT require removal of transmission.
Every cooling "T" is pressurized in a test fixture at 20-25 PSI to ensure there are no leaks at the weld joint prior to shipping.
Brand New In Box - $100 Shipped
PayPal Only - If you pay by Credit Card add 3%
