Kenne bell removal

[Chipofsc]

Hey guys I need to return my benne bell for a rebuild and I have never pulled it before. Been reading a lot of good threads about it and most are saying to pull the blower and intercooler with intake together. My question is how heavy will it be. Do I need to use a cherry picker or can to guys handle it. Someone said it was 150 lbs. any ideas

 

[ctgreddy]

I doubt it's 150lbs, but it's deff a heavy bastard. If the bolts are hard to get to for the blower to lower, it'll be easier pulling it all in one shot. two guys will be able to get it.

 

[Chipofsc]

Thanks, I have access to a cherry picker but didn't want to haul that thing to my house if it was not needed. That back bolt under the manifold is a bitch to get to.

 

[Rich'sTRsvt]

I think it is around 50 to 60lbs with the lower attached. It is not too bad with a second set of hands.

 

[fr03cobra]

yea its a back breaker doing it yourself. just say free beer and you will have another set of hands.lol or take the hood off and use the cherry picker like you said. GL