Kenne Bell Boost a Pump setting

[Banshee06]

What does every one have their BAP set to?
One of my tuners had mine set to 70 % when I had 525 rwhp
the next tuner has it set to 10 % and I have 708 rwhp.
it seems to me that would be to low.

 

[01yellercobra]

What's your duty cycle currently at? Did you change pumps in between those tuners?

 

[Banshee06]

no it is still stock cobra pumps, I am not sure how to check the duty cycle.
the Only difference was I went to 1 size smaller pulley and have methanol injection when under boost.

 

[cj428mach]

You can turn the bap where ever you want it wont affect the afr any despite the dial saying richer or leaner.

Ideally you probably want it set to give you enough fuel pump duty cycle head room and no more. It should increase fuel pump life and help with erratic fuel pressure when shifting.

 

[Bdubbs]

When I ran a bap I set it to "max". I put electrical tape on the dial to prevent it from turning.

Sent from my Moto E (4) Plus using the svtperformance.com mobile app

 

[01yellercobra]

Isn't 700 pushing it a little with stock pumps and a BAP?

 

[whitedevil95]

Your power level seems a bit wild for stock pumps and a BAP. But when I had a BAP i ran it on full power all the time.

 

[apex svt]

Stock pumps & bap at 700hp. Impressive

 

[Banshee06]

what pumps do you use if not stock and do you have to do anything other than replace the pumps?
and do you still use the BAP?

 

[apex svt]

what pumps do you use if not stock and do you have to do anything other than replace the pumps?
and do you still use the BAP?

A lot of people like the walboro 255’s (improved GT pumps). I think you need to run stacked fpdm’s or the modified zone 5 fpdm.