Originally posted by Xplicit
Only if u send some of that sunny, warm West Coast weather this way ;-)
:beer:
Originally posted by Xplicit
Only if u send some of that sunny, warm West Coast weather this way ;-)
Just out of curiosit, does crower have any published numbers(HP/TQ) for the cams?Originally posted by Xplicit
Thanks Tony
Larry, Stage II Crower Cams....
L&M and shawn hyland make cams as well but I havent seen any results posted yet.Originally posted by Evil SS
SO who makes cams besides crower?
What? So you're saying i should put on huge wings, rice my car out..but mine would at least be functional to fly to Cali ;-) It's all about having fun, and we're gonna have it this Summer :beer:Originally posted by VENOMOUS03COBRA
franco - your fuggin crazy man!! you make your car any more faster and you can fly to the west coast yourself!! ;-)
Originally posted by Shadowgray03
L&M and shawn hyland make cams as well but I havent seen any results posted yet.
Originally posted by lRageATMl
you will see results for the l&m cams (stage 1) in a couple of weeks...it will be my car with a ton of other goodies...
Before my car made 485rwhp and 517rwtq with the following mods:
2.75 upper and 4lb lower
Magnaflow 3inch catback and VRS Catted Mid pipe
12 inch power stack filter
Chip (Amazon Tune)
Couple weeks when my car is back together and tuned:
2.93 upper and 4lb lower
Magnaflow 3inch catback and VRS Catted Mid pipe
12 inch power stack filter
EFI Flash by Kauffman's
Ported Heads by LM Engines
Valve Job by LM Engines
Port matched upper mainfold by LM Engines
Stage I Cams from LM Engines
Ported Blower from LM Engines
Billetflow Throttle Body and Plenum
Pro-M 95mm MAF
Focus Fuel Pumps
55lb Injectors
Block will be bored .020 over, 15cc diamond dish pistons (compression will be ~8.7:1)
I think that is everything....probably missed something...
So I will be able to give some kind of results even though I am doing many things at once.
Unfortunatly with so many mpods being done the data will be worthless to me. Im interested in what cams alone or cams and porting can do. Debating if it is worth the expense but when its done with a ton of other mods it makes it impossible to exrapolate what benefit came from what.Originally posted by lRageATMl
you will see results for the l&m cams (stage 1) in a couple of weeks...it will be my car with a ton of other goodies...
Before my car made 485rwhp and 517rwtq with the following mods:
2.75 upper and 4lb lower
Magnaflow 3inch catback and VRS Catted Mid pipe
12 inch power stack filter
Chip (Amazon Tune)
Couple weeks when my car is back together and tuned:
2.93 upper and 4lb lower
Magnaflow 3inch catback and VRS Catted Mid pipe
12 inch power stack filter
EFI Flash by Kauffman's
Ported Heads by LM Engines
Valve Job by LM Engines
Port matched upper mainfold by LM Engines
Stage I Cams from LM Engines
Ported Blower from LM Engines
Billetflow Throttle Body and Plenum
Pro-M 95mm MAF
Focus Fuel Pumps
55lb Injectors
Block will be bored .020 over, 15cc diamond dish pistons (compression will be ~8.7:1)
I think that is everything....probably missed something...
So I will be able to give some kind of results even though I am doing many things at once.