• Welcome to SVTPerformance!

KB 2.2 oil change question

Discussion in 'The Blower Bistro' started by USCmustang, Sep 18, 2019.

  1. USCmustang

    USCmustang New Member

    Messages:
    5
    Joined:
    Sep 11, 2019
    Location:
    SC
    I'm getting ready to change the oil in my KB later this afternoon and I know of the drain plug on the front drivers side of the charger. I was just curious how best not to spill the oil all over the motor. Should i remove the fill plug and pump as much out as possible with a small hand pump vacuum (I need to buy one if so, hence why I'm inquiring prior to heading home.) or simply drain from the lower drain plug? It seems that if I drained from the drain plug that it would be very difficult to catch the oil in a pan of sorts and I wouldn't be able to stop the oil from getting all over the motor.

    Any info would be appreciated.

    Thx! kb 2.2.png
     
  2. slo984now

    slo984now AKA 01yellerCobra Established Member

    Messages:
    15,126
    Joined:
    Oct 5, 2005
    Location:
    San Diego
    I would get a pump and suck it out through the top. I think that's the only way you'll keep it clean.
     
    USCmustang likes this.

Share This Page