hey guys just got my 850whp return fuel system for my 04 cobra but im missing some fragola fittings. i read the instructions but its saying i need some parts i dont have like i tried calling in the afternoon but you guys had closed already
xrp-989008 -8an o-ring 90 deg -8an male flare (that goes on the far left port on the aeromotive regulator)
120 deg -8an hose end (that connects to the front of the driver side fuel rail)
a extra 45 deg hose i dont have (it says to use on to connect the 9" hose to regulator, one on the passenger side rail, and its asking me to use another one to connect to the bottom of the regulator)
a extra -8an straight hose end (need one to connect to the return port on fuel hat,uses one on the 9" hose that connects to the single port on the y block,and and two that comeout the front of the rails that connect to the two ports on the y block
i did a inventory check and this is what i have
(2) 204508 -8an 45 deg. hose end
(1) 209008 -8an 90 deg hose end
(4) 200110 -10an straight hose ends
(3) 200108 -8an straight hose ends
(2) xrp-980008 -8an 90 deg hose end
(1) xrp-980009 xrp performance fittings -8an o ring/ -10an male flare
(2) 495106 -10an radius x -10an male flare
(1) 481688 1/2 npt x -8an male flare
(2) 481608 3/8 npt x -8an male flare
(1) 495104 -10an radius x -8an male flare
or do you guys think i just got the wrong instructions i dont see anywhere in the instructions were to use the 90 deg fitting or where to connect the feed or if i might be missing any othe fittings if yoiu guys could please help me out figure this out were does the regulator mount to
i also wanted to know which port is which on the aeromotive regulator (13110)
xrp-989008 -8an o-ring 90 deg -8an male flare (that goes on the far left port on the aeromotive regulator)
120 deg -8an hose end (that connects to the front of the driver side fuel rail)
a extra 45 deg hose i dont have (it says to use on to connect the 9" hose to regulator, one on the passenger side rail, and its asking me to use another one to connect to the bottom of the regulator)
a extra -8an straight hose end (need one to connect to the return port on fuel hat,uses one on the 9" hose that connects to the single port on the y block,and and two that comeout the front of the rails that connect to the two ports on the y block
i did a inventory check and this is what i have
(2) 204508 -8an 45 deg. hose end
(1) 209008 -8an 90 deg hose end
(4) 200110 -10an straight hose ends
(3) 200108 -8an straight hose ends
(2) xrp-980008 -8an 90 deg hose end
(1) xrp-980009 xrp performance fittings -8an o ring/ -10an male flare
(2) 495106 -10an radius x -10an male flare
(1) 481688 1/2 npt x -8an male flare
(2) 481608 3/8 npt x -8an male flare
(1) 495104 -10an radius x -8an male flare
or do you guys think i just got the wrong instructions i dont see anywhere in the instructions were to use the 90 deg fitting or where to connect the feed or if i might be missing any othe fittings if yoiu guys could please help me out figure this out were does the regulator mount to
i also wanted to know which port is which on the aeromotive regulator (13110)
Last edited:
