Jlt Intake problem

[slifko52]

Im posting this thread in search of an answer, i put a jlt cold intake kit on my 2003 terminator and a slp loud mouth 2 cat back on it and now it wont run it fires but wont idle unless the mass air is disconnected and then it will idle, any one out there have an idea for me

 

[99stanger]

Did you forget to connect something? Go back and check all your connections.

 

[cobracide]

Clean the mass air sensor GENTLY with rubbing alcohol. Check the maf orientation is 11-12 o'clock.

 

[NITROS COBRA]

Vacuum leak. You may have missed a hose or forgot to reroute due to jlt.

 

[99stanger]

Clean the mass air sensor GENTLY with rubbing alcohol. Check the maf orientation is 11-12 o'clock.

Or you could just hit it with a quick spray of Carb cleaner from about 6inches away.

- Defintly sounds like he has some sort of vacuum connection problem though.

 

[slifko52]

Did you forget to connect something? Go back and check all your connections.

i checked everything, its all connected. but what didnt make sence to me is that when u disconnect the mass air sen. it runs ok, didnt get to take it down the road to c if when its disconnected if it will run ok but it idles once its not connected

 

[fordvicious32v]

that happened to me once check your tps sensor