PLEASE LOOK AT THE PICTURES CLOSELY
I have a set of 8 JE forged pistons. PN 227127
They were ran for only a couple thousand miles, the engine had a timing component fail, and the pistons hit the valves. I had them cleaned up when I had all the other machine work done. But now I am going .030" over.
Here is the link to summit for them:
https://www.summitracing.com/parts/jep-227127-8
They were cleaned up, there are no sharp edges at all. All 8 pins were inspected and good. The pin bores are good as well.
These are for a 1.5/1.5/3.0 ring pack.
No wrist pin retainers included, these are double spiro lock style.
The listing is for 8 pistons, and 8 wrist pins.
I was told by my local machinist these are cleaned up, and would be fine to run again.
These were $800 new, asking $300. Reasonable offers will be considered.
I have a set of 8 JE forged pistons. PN 227127
They were ran for only a couple thousand miles, the engine had a timing component fail, and the pistons hit the valves. I had them cleaned up when I had all the other machine work done. But now I am going .030" over.
Here is the link to summit for them:
https://www.summitracing.com/parts/jep-227127-8
They were cleaned up, there are no sharp edges at all. All 8 pins were inspected and good. The pin bores are good as well.
These are for a 1.5/1.5/3.0 ring pack.
No wrist pin retainers included, these are double spiro lock style.
The listing is for 8 pistons, and 8 wrist pins.
I was told by my local machinist these are cleaned up, and would be fine to run again.
These were $800 new, asking $300. Reasonable offers will be considered.
Attachments
Last edited: