Awesome . I've seen some people selling on FB pages and even powder coated and in any color.I love mine both the looks and the stopping power!
Sent from my Moto E (4) Plus using Tapatalk
Awesome . I've seen some people selling on FB pages and even powder coated and in any color.I love mine both the looks and the stopping power!
Awesome . I've seen some people selling on FB pages and even powder coated and in any color.
Sent from my Moto E (4) Plus using Tapatalk
I have a new caliper and rotor spacers I'll sell cheap if you re looking to do this mod.Awesome . I've seen some people selling on FB pages and even powder coated and in any color.
Sent from my Moto E (4) Plus using Tapatalk
Mike can you pm details and pictures?I have a new caliper and rotor spacers I'll sell cheap if you re looking to do this mod.
Is anyone installing these and keeping the factory grey finish? Where can the brembo decals be bought?
Sent from my Moto E (4) Plus using Tapatalk
Is anyone installing these and keeping the factory grey finish? Where can the brembo decals be bought?
Sent from my Moto E (4) Plus using Tapatalk
Is anyone installing these and keeping the factory grey finish? Where can the brembo decals be bought?
Sent from my Moto E (4) Plus using Tapatalk
I finally got some new spacers that bring the poke down to an acceptable level. 17mm for my wheels. Based on my original measurements, these calipers protrude about 35mm further toward the wheel than the OEM Cobra calipers.
Chris S. sells new offset guides/spacers to bring everything back to factory. I am the process of hammering out the old guides and putting the new ones in so that the caliper can be mounted. I am happy I do not have to drill the spindle which is a permanent mod.
Believe they are talking about these. Just so the caliper is exactly centered over the rotor.I am so confused. What are these spacers everyone is talking about? I have this mod and no spacers were needed. Is it to fit specific wheels?
Believe they are talking about these. Just so the caliper is exactly centered over the rotor.
https://www.svtperformance.com/threads/new-94-04-spindle-brake-option.1170597/
Here's the rotor spacers. I didn't need them because I milled my calipers.I am so confused. What are these spacers everyone is talking about? I have this mod and no spacers were needed. Is it to fit specific wheels?
Here's the rotor spacers. I didn't need them because I milled my calipers.View attachment 1626548
I am so confused. What are these spacers everyone is talking about? I have this mod and no spacers were needed. Is it to fit specific wheels?
How much does the caliper need to be milled?
This makes the calipers a bolt on mod without drilling the stock spindles. The bushings in the kit replace the factory brembo caliper bushings. It also lowers the caliper down so you don't have the large amount of pad that doesn't contact the rotor. In my opinion it's the only way to do this mod..075” or 1.905 mm
ok not sure why people are adding extra parts to a simple mod and then have issues with spacers.