Is the installation of the Gen 2R on a 12GT500 the same as installing the Gen2?
Any modification or changes I should be aware of?
Any modification or changes I should be aware of?
True but unless hes having issues I see no reason to take it all apart for something thats likely not needed and not causing anything wrong? Plus its far less important then on a head IMO.
If it makes you feel any better about it there are several threads on gt500 forum about this topic of using the dowels or not and its seems like about half do and half dont, and I have yet to come across anyone with issues from not using them. I did a lot of research on this today lol.Thanks for all the input.
I think what I going to do is pull bolts from the front and rear of the SC and make sure the SC is centered in the bolt pads.
Hopefully that will not cause belt alignment issues.
If I find belt residue I will remove the SC and replacing the dowels.
dowel or no dowel?Just for closure.
The Gen2R has been installed as with the many other required mods.
Everything bolted up correctly and aligned fine.
Just waiting on a VMP tune and I will be out on the streets soon.
Thanks for the input guys.