Hey guys, not sure if I'm posting this in the right category but I'm trying to figure out the correct formula to use with my MTX-L. I'll be doing remote data-logging with my SCT livewire and laptop using Livelink. In Livelink, they have preset formula's for certain widebands (AEM, Innovate LC-1/LM-1) but they do not have the newest MTX-L. I've been told by several that the formula is different than the MC-1/LM-1 and was curious if anyone is using the MTX-L has came up with their own formula to share. Otherwise I'll likely be calling Innovate and/or attempting to build my own formula that works. Any help would be greatly appreciated. Thanks
Innovate MTX-L formula for Data-logging
- Thread starter RioRed97Cob
- Start date
I would contact SCT on that one but as I always understood it:
analog input equation= (v*((hi afr-lo afr)/4)+ lo afr)
hi afr being the highest afr reading your guage will show and lo afr being the lowest.
analog input equation= (v*((hi afr-lo afr)/4)+ lo afr)
hi afr being the highest afr reading your guage will show and lo afr being the lowest.
LC1 is the same but don't forget to take in account for grounds!
AFR = (V*3.008) + 7.35
AFR = Air/fuel ratio
V = Voltage
3.008 = Range Multiplier
7.35 = Starting point of range
AFR = (V*3.008) + 7.35
AFR = Air/fuel ratio
V = Voltage
3.008 = Range Multiplier
7.35 = Starting point of range
Users who are viewing this thread
