10 by 2.5 inch 450 lb front coilover springs for use with MM coilover setup, I believe this will fit any coilover setup on the front of a mustang as well. I needed a softer spring so I switched to 400 front, otherwise these are fine.
Also have Lowering springs for the rear. Used these for a few thousand miles but ended up going with coilovers in the rear.
10 x 5.5 inch 900 lb rear conventional springs for use with a Mustang Cobra IRS. These include Maximum Motorsports Poly Isolators as well. I needed height adjust ability otherwise these were fine. I don't remember the exact drop but it was about 1.5-2 inches lower than stock from what I remember. REARS SOLD!
Asking 40 plus shipping for each pair or 75 plus shipping for the set.
They can be picked up in north chicagoland area as well if you're local.
Rears
Fronts
Also have Lowering springs for the rear. Used these for a few thousand miles but ended up going with coilovers in the rear.
10 x 5.5 inch 900 lb rear conventional springs for use with a Mustang Cobra IRS. These include Maximum Motorsports Poly Isolators as well. I needed height adjust ability otherwise these were fine. I don't remember the exact drop but it was about 1.5-2 inches lower than stock from what I remember. REARS SOLD!
Asking 40 plus shipping for each pair or 75 plus shipping for the set.
They can be picked up in north chicagoland area as well if you're local.
Rears
Fronts
Last edited:
