hydroboost system bleed?

[static74]

i replaced all the lines for my hydroboost system with an fitting. my pump is getting fluid but i have no power steering, i'm thinking there is air trapped in the system. i've tried rotating the wheel to the left and right several times and im still not getting anything.

any suggestions?

 

[John M]

put a vaccum pump on the p/s reservoir and try it again, when I replace p/s pumps I usually fill the reservoir and turn the wheel without it started to get it close to full and use a vaccum pump when I start it (don't hold the wheel on the stops as that is max psi on your pump)