Hurt 5.4 4v complete forged engine

02silverstang

Authorized Vendor
Authorized Vendor
Joined
Nov 13, 2005
Messages
764
Location
New Braunfels Tx
This engine was in a friends 2001 cobra conv he went to a stocks 03 cobra drivetrain needs this gone there is well over $5,000 in parts alone here .

forged rods and pistons , crank
ported heads with springs ,cams
sullivan intake upper and lower
acufab throtle body
long tube headers
aftermarket fuel rails
timing cover with all front pullies

$4,000 for the complete engine . all arp hardware .here are the specs on the engine


gt500 block
lincoln nav heads
lincoln nav timing cover
01 cobra valve covers
sillivan lower and upper intake for throtle body
bbk throtle body
steeda fuel rails
canton oil pan
custom turbo cams



THE ONLY PROBLEM IS IT NEED NEW ROD BEARINGS BUT IN PARTS ALONE THIS ENGINE HAS A LOT OF MONEY INVESTED .



ALSO TRUE REAL viper spec tranny low miles NEEDS BELL HOUSING FORGOT TO POST EARLIER
$1000 plus shipping

5.4 CUSTOM TWIN TURBO KIT FOR A MUSTANG :
$3000

COMPLETE SCCA LEGAL RACING FUEL CELL AND AEROMOTIVE FUEL PUMP AND LINES :
$1000

FAST ENGINE MANAGEMENT SYSTEM COMPLETE FOR 4.6 OR 5.4 MODUALR :
$1000

there is many more parts am going by the shop today and I will get a list and pics of all the parts .

IF YOU WANT THE WHOLE SET UP MY FRIEND WOULD TAKE $8000 FOR EVERYTHING LISTED ABOVE HE NEEDS TOP GET RID OF ALL THIS STUFF . CAR WENT BACK TO STOCK . I WILL GET PICTURES TOMM AT THE SHOP AND TRY TO HAVE A BETTER LIST AND DESCRIPTIONS OF ALL THE PARTS LISTED THANKS YOU FOR ALL THE PEOPLE INTERESTED .
 
Last edited:

saleensc281

Member
Established Member
Joined
Dec 21, 2004
Messages
616
Location
Clarksville, TN
Whats wrong with the tranny? T56 right, cuz that is a wicked deal. How many miles are on it and does it include the bellhousing?
 

02silverstang

Authorized Vendor
Authorized Vendor
Joined
Nov 13, 2005
Messages
764
Location
New Braunfels Tx
am geting all the details on the engine and tranny as soon as i get them i will reply to all pms . and post the complete details on that engine ..
 

02silverstang

Authorized Vendor
Authorized Vendor
Joined
Nov 13, 2005
Messages
764
Location
New Braunfels Tx
bump and update

these parts are still available here is the break down on the motor

gt500 block
lincoln nav heads
lincoln nav timing cover
01 cobra valve covers
sillivan lower and upper intake for throtle body
bbk throtle body
steeda fuel rails
canton oil pan
custom turbo cams

the tranny is a viper spec with bell housing for extra
28 spline will bolt to any modular motor or f body great condition

custom 4v 5.4 turbo kit with 74mm turbo genics turbo if any one has any questions feel free to call me at 210 875-9652 thanks..
 

02silverstang

Authorized Vendor
Authorized Vendor
Joined
Nov 13, 2005
Messages
764
Location
New Braunfels Tx
bump just for the record I will not seperate the engine it will be sold as a complete engine unless some one buys the long block 1st thanks.. for looking
 

dcook_14

New Member
Established Member
Joined
Jun 28, 2009
Messages
242
Location
Cedar Falls, Iowa
This engine was in a friends 2001 cobra conv he went to a stocks 03 cobra drivetrain needs this gone there is well over $5,000 in parts alone here .

forged rods and pistons , crank
ported heads with springs ,cams
sullivan intake upper and lower
acufab throtle body
long tube headers
aftermarket fuel rails
timing cover with all front pullies

$4,000 for the complete engine . all arp hardware .here are the specs on the engine :

navigator block .20 over
03 cobra heads ported and polished crower springs and crower stage 2 blower cams
either je pistons or eries
sullivan intake with upper for throtle body
ligthning forged crank
eagle h rods for 5.4


THE ONLY PROBLEM IS IT NEED NEW ROD BEARINGS BUT IN PARTS ALONE THIS ENGINE HAS A LOT OF MONEY INVESTED .



ALSO TRUE REAL viper spec tranny low miles NEEDS BELL HOUSING FORGOT TO POST EARLIER
$1000 plus shipping

bump and update

these parts are still available here is the break down on the motor

gt500 block
lincoln nav heads
lincoln nav timing cover
01 cobra valve covers
sillivan lower and upper intake for throtle body
bbk throtle body
steeda fuel rails
canton oil pan
custom turbo cams

the tranny is a viper spec with bell housing for extra
28 spline will bolt to any modular motor or f body great condition

I'm really confused. You have two completely different engines listed. Which one are you selling?

You also have posted that the T-56 needs a bell housing, but then you say that it comes with an extra one...?
 

so_r_crazy

Active Member
Established Member
Joined
Nov 24, 2008
Messages
1,190
Location
Houston, TX
He is selling for a friend, and I think when he originally posted he didnt have the full details. I think the updated posting is with better information. The extra is for extra cost you can get bell.

Cesar correct me if I am wrong.
 

02silverstang

Authorized Vendor
Authorized Vendor
Joined
Nov 13, 2005
Messages
764
Location
New Braunfels Tx
I'm really confused. You have two completely different engines listed. Which one are you selling?

You also have posted that the T-56 needs a bell housing, but then you say that it comes with an extra one...?

the problem is i had not got a complete list of all the parts yet and just found out he has the bell housing also after i went to talk to him on fri sorry for the confussion .
 

Users who are viewing this thread



Top