How does this set-up sound.....Opinions.

[Hy_Dro]

Will be going the pulley route next month and want to make sure i'll be happy/satisfied with everything im ordering.

RR 2.8 Pulley
BilletFlow 3 piece idler set
Gates Belt #K080740
NGK TR6 plugs
Superchips SCT

So, how does this sound. Anything I should change or dont need? Opinions please.

Hopeing to be around 460rwhp with Cai, cat-back and the mods listed above.

Thanks

 

[jimh]

You might want to try your stock belt 75" first if you have 3 idlers. Why throw moner away. Too tight will just wear bearings and actually cost HP. I have a 2.84 with 1 idler and use the Gates 740 which is 74 5/8". I had the stock belt on there and didn't seem to get any slip but it was near the end of the tensioner adjustment. I just changed it out today and had no belt dust from the old belt, but I've only run it for about a week and hadn't put many miles on it.

.02
jim