High pitch noise at WOT.

[slow232]

I started getting noise at WOT or close to WOT that sounds like a bearing going out, it is high pitched.

So my question is, Can i remove the blower belt and go WOT to determine if the noise is coming from the blower or the accesories?

Thanks guys!

FWIW, The truck is a 00 with 65k miles.

 

[baer42]

Yup, But it's going to be a little slower

 

[Nvr_Spds]

A little is an understatement. Your going to be running so ridiculously rich. But yes, you can do it.. And it will be COMPLETELY gutless.

 

[URBAN COWBOY]

Yup, But it's going to be a little slower

:lol:

What do you think she would run without the ole blower hooked up?

URBAN COWBOY

 

[slvrsvtlghtng]

slow

 

[slow232]

:lol:

I will give it a try, i hope its not the eaton making the noise.

 

[AZ ERIK]

:lol:

What do you think she would run without the ole blower hooked up?

URBAN COWBOY

17.8 1320. No Spray, all motor


I'd hope it's the Eaton. You could either get one off here for around $400 or the part you need.

My guess will be an idler pulley or tensioner

 

[slow232]

17.8 1320. No Spray, all motor


I'd hope it's the Eaton. You could either get one off here for around $400 or the part you need.

My guess will be an idler pulley or tensioner

It was one of the idler pullies. I have a good amount of mustang stock parts and it just so happens that the 99 v6 motor uses the same size idler as the L. :rockon: